HWg Overige sensoren en Accessoires
Op deze pagina vind kunt u de volgende items vinden:
– HWg SMS Gateway,
– Accessoires voor de HWg WLD serie,
– Accessoires voor de HWg SH4 Serie,
– Accessoires voor de I/O Controller,
– Overige Accessoires (Calibratie tool, Mount Plates, DinRail set, Verschillende HUB’s, enz),
– Power Adapters.
![]() HWg SMS GatewayHWg-SMS-GW3 is a SMS gateway for sending text message alarms over a LAN. Send SMS alarms from other HW group products and software through a single gateway and a single SIM. No software needed, works over a LAN at the Box-2-Box level. Demo |
Power-boosted hub for the 1-Wire bus. Compatible with 1-Wire and 1-Wire UNI bus. With 1-Wire hub Power, several sensors with higher current consumption (such as Sensor 60V 1W-UNI or Sensor 20mA 1W-UNI) can be connected to a single Poseidon2 unit. |
S-Hub represents a device which allows connecting RS-485 sensors to Poseidon Family units. The RS-485 bus is connected to the Poseidon model 1250 via TP cables and RJ45 connectors
|
T-Box hub is designed for connecting sensors over 1-Wire bus to Poseidon Family units. The 1-Wire bus is connected over phone cables and RJ11 connectors. T-Box allows you to connect up to 5 sensors to one Poseidon unit.
|
Connects 4 dry contacts or 1-Wire bus RJ11 sensors to Poseidon 2250 via RS-485 (RJ45) bus
|
A mounting kit for installing HWg devices to a DIN rail.
|
Mount support for HWg-Ares and Poseidon2
|
Mount plate E- 1U
|
1-Wire UNI sensors enables setting and calibration of the measured values, including an option to change the unit type of the value, an exponent and, based on the sensor’s type, up to 8-point calibration chart
|
E-lock BeFo 512 is an electromagnetic lock suitable for the connection to our RFID constructions or coded locks.
|
Southco electronic swing-handle for rack/cabinet access systems. Can be extended by HWg-SH2 or HWg-SH3 for Web/SNMP remote cabinet door access control. Supplied with a 4m connection cable.
|
A test board for easy setup and debugging of your applications for the I/O Controller. It´s connected to 20 pin connector in the delivery.
|
RFID Card type M1. White card with HWg logo & printed order code.
|
RFID reader in standard EM4100 (125kHz) with keyboard and interface of Wiegand.
|
This RFID tag is EM4102 chip with unique code of 64bits.
|
12V / 1.5A power adapter, International version.
|
12V / 0.5A power adapter, International version.
|
5V STE power adapter, EU version.
|
Temperature probe Pt100/A on the cable. Temperature range -50 to 200°C. Silicon covered cable 2m, 4-wires, IP67 probe in in stainless steel tube 50mm
|
Temperature probe Pt100/B for low temperatures. Temperature range -190 to +150°C. PTFE covered cable 2m, 4-wires, IP67 probe in in stainless steel tube 50mm.
|
Water leak detection cable A – 10m for use with HWg-WLD and HWg-WLD Relay.
|
Water leak detection cable A – 2m for use with HWg-WLD and HWg-WLD Relay.
|
Water leak detection cable A – 50m for use with HWg-WLD and HWg-WLD Relay.
|
2m connection cable for connecting HWg-WLD with WLD – A cable.
|
Prolong non-sensitive cable 5m for WLD type A. Can be extended to up to 100m in total.
|